Queue length oscillation at a congested link causes many undesirable properties such as large delay jitter, underutilization of the link and packet drops in burst. The main reason of this oscillation is that most queue management schemes determine the drop probability based on the current traffic without consideration on the impact of that drop probability on the future traffic. This paper proposes a new Active Queue (AQM) scheme to reduce queue oscillation and realize stable queue length. The proposed scheme measures the current arrival and drop rates, and uses them to estimate the next arrival rate. Based on this estimation, the scheme calculates the drop probability which is expected to realize stable queue length.
Did you find this white paper useful?
27 out of 39 users found this white paper useful
Related white papers
Detecting Duplex Mismatch on Ethernet
IEEE 802.3 Ethernet networks, a standard LAN environment, provide a way to auto-negotiate the settings of capacity (10, 100, or 1000 Mb/s) and duplex (full- or half-). Under certain conditions...
An Overview of EtherNet/IP: An Application Layer Protocol for Industrial Automation
This paper presents an overview of Ethernet/IP (EIP), a high-level industrial application layer protocol for industrial automation applications. Built on the standard TCP/IP protocol suite, EIP uses all the traditional...
Utilization of Modern Switching Technology in EtherNet/IP Networks
EtherNet/IP networks are widely used in industrial environments and time-critical applications. This paper characterizes traffic generated in a typical EtherNet/IP network and compare it with office network traffic. The paper...
High Performance User Level Sockets Over Gigabit Ethernet
While a number of User-Level Protocols have been developed to reduce the gap between the performance capabilities of the physical network and the performance actually available, applications that have already...
Integrating Ethernet in Carrier Class Networks
Service providers are experiencing a variety of processing demands for handling the growth of Ethernet traffic in converged IP networks in both metro and core environments. IP convergence, with its...
Implementing Ethernet I/O in the Pulp Mill
The majority of process variables that are displayed to operators, archived in historians, sliced, diced and analyzed by engineers are simple analog and discrete inputs. Large numbers of control outputs...
Improving Determinism of Real-Time Applications Over Ethernet
Current estimates indicate that the number of Industrial Ethernet devices shipped will double in next two years. Modbus TCP and Ethernet/IP together represents already more than 50% of the number...
