| Publisher | Massachusetts Institute of Technology | ||
|---|---|---|---|
| Format | 1.4MB PDF | Date added | 19 Jul 2006 |
| Topics | Wireless LAN, Software Engineering, Mobile - Wireless Communications | ||
| Downloads | 55 | ||
An adaptive algorithm is proposed for OFDM signal detection on Doppler-distorted, time-varying multipath channels. The focus of the approach is on low complexity post-FFT signal processing. The receiver performs MMSE combining of signals received across an array, using adaptive channel estimation. Nonuniform Doppler compensation across subbands is performed using a single adaptively estimated parameter representing the Doppler rate. Algorithm performance is demonstrated on experimental data, transmitted through a shallow water channel over the distance of 2.5 km. QPSK modulation with a varying number of carriers is used in a 24 kHz acoustic bandwidth. Excellent performance is achieved with up to 1024 carriers, yielding an overall bit rate of 30 kbps.
Related white papers
Intel Case Study: Strix Systems Access/One Network
The difference between a Strix Systems Access/One Network and a typical enterprise network is simple: wires or, no wires. Going where only wired solutions have gone before, Strix Systems designed...
Adapting to the Wireless Environment With 802.11k
This webcast will explain what is 802.11k and why is it needed, 802.11k and the wireless environment, radio resource measurement and control and how 802.11k will impact IT Adaptive algorithms....
Cisco Wireless Solution Helps Florida Hospital Enhance Patient Care
Florida Hospital administrators wanted to link more than 90 facilities within the vast Florida Hospital system to increase the patient care capability of caregivers, make network management faster and easier,...
Colubris Networks Case Study: Connexion by Boeing
Connexion by Boeing is globally recognized as the industry's first and foremost provider of secure, high-speed in-flight Internet access for commercial and executive aircraft operators. In creating the Connexion by...
Conducting a WLAN Site Survey and Implementation for the Cisco® Unified Wireless Network
When preparing to conduct a site survey for a Cisco® wireless LAN (WLAN) installation, follow the Cisco network design methodology: Prepare, Plan, Design, Implement, Operate, and Optimize (PPDIOO). PPDIOO addresses...
SyncScan: Practical Fast Handoff for 802.11 Infrastructure Networks
This paper describes SyncScan, a low-cost technique for continuously tracking nearby base stations by synchronizing short listening periods at the client with periodic transmissions from each base station. The paper...
I Can See Clearly Now: Bringing Wireless Broadband Video Into Focus
Sending broadband video over Wireless LANs (WLANs) used to be a trying experience, with jitter and dropouts marring picture quality, and bandwidth limits restricting the number of available channels. Three...




