Signal clipping has been suggested as an effective Peak-to-Average Power Ratio (PAPR) reduction scheme for orthogonal frequency-division multiplexing (OFDM). This paper analyzes clipped M-ary differentially encoded phase-shift keying (M-DPSK) OFDM. The impact of Input Power Backoff (IBO) of a nonlinear Power Amplifier (PA) is evaluated. An effective PAPR reduction scheme should provide one of the two equivalent Enhancements; a reduced error floor at a given backoff, or; a reduced required IBO to achieve a target BER. The later is addressed by determining the Total Degradation (TD) of the system at various IBO. By this measure, it is shown that clipping is ineffective. Moreover, it is shown that clipping PAPR reduction doesn't improve the spectral broadening caused by the PA.
Did you find this white paper useful?
28 out of 45 users found this white paper useful
Related white papers
HiperLAN2 – the Broadband Radio Transmission Technology Operating in the 5 GHz Frequency Band
To meet the networking requirements of tomorrow, a new generation of both WLAN and cellular network technologies are under development. These requirements include support for QoS (to build multiservice networks),...
Why 802.11 Should Stay Indoors
An Explanation of Problems Surrounding the Use of 802.11b Compliant Radio Products for Outdoor Point-to-Multipoint Communications and Metropolitan Area Networks Currently, a number of vendors are promoting 802.11b compliance in their...
Bluetooth™: the Leading Edge in Wireless Personal Area Networking
The Bluetooth specification is ideal for mobile professionals who need to link notebook computers, mobile phones, PDAs, PIMs, digital cameras, and other handheld devices to do business at home, on...
Real Time Locating Systems and Wireless Local Area Networking: Combining Technologies for Optimum Asset Visibility and Supply Chain Management
Accurately tracking inventory, materials, and workflow is critical to serving customers and controlling operating costs. Until recently, solutions have typically ranged from primitive paper-tracking methods to bar coding and warehouse...
Indoor Radio WLAN Performance Part II: Range Performance in a Dense Office Environment
This paper discusses indoor WLAN DSSS radio range testing relating antenna type, radiated power, and transmitter/receiver separation to the IEEE 802.11 compliance range at the 2.4 GHz ISM band frequencies. Indoor...
RFID: Avoid the Hype
At the risk of sounding like a broken record, the real news in radio frequency identification (RFID) is that major vendors are trying to avoid the traps they’ve fallen into...
Use of a Wireless LAN
Wireless LAN's offer an alternative to traditional cabling or fiber optic networks. The purpose of a WLAN is the same as its hard-wired counterpart: to transmit information between devices attached...
