This paper describes installation and configuration procedures for Flash memory cards, which ship as spare parts (=), and are used with the Route Switch Processors (RSPs). The Flash memory card is an 8-, 16-, 20- or 32-MB, Flash memory card, which conforms with the PC Card format formally called Personal Computer Memory Card International Association (PCMCIA).
Did you find this white paper useful?
32 out of 50 users found this white paper useful
Related white papers
Remote Operating System Installation
For computers in your organization that do not contain a PXE-based remote boot ROM, Microsoft provides the administrator with a tool to create a remote boot disk for use with...
HP Local I/O Strategy for ProLiant Servers
This paper is intended to clarify HP local I/O strategy for ProLiant servers. HP server I/O priorities reflect the demands of IT managers. HP supports I/O technologies that protect customer...
Power Management of USB Host Controllers
This paper provides information about power capabilities of USB 2.0 host controllers. It outlines the procedure for defining capabilities and explains interpretation of these capabilities by the USB host controller...
PCI Card Placement Rules for the IBM eServer iSeries Server
The implementation of Peripheral Component Interconnect (PCI) architecture provides flexibility in the placement of input/output processors (IOPs) and input/output adapters (IOAs) in iSeries 270, 800, 810, 820, 825, 840, 840,...
Industry Transition from PC Card to Expresscard Technology
Dell is a strong proponent and supporter of Express-Card technology. In this white paper, Dell explains why the PC Card is nearing its end of life. The paper also describes...
Hot-Plug PCI on Windows Operating Systems
Hot-Plug PCI allows users to install and remove PCI devices while the computer is running. Microsoft Windows 2000 and the next release of the Windows operating system, code-named Windows "Whistler,"...
Legacy PCI Interrupt Routing and CardBus in Windows 2000
The Microsoft Windows 2000 operating system supports PCI interrupt routing on non-ACPI machines when the following conditions are true: The BIOS provides IRQ routing information using either $PIR (as defined...
