| Publisher | Circuit Breaker Industries (CBI) | ||
|---|---|---|---|
| Format | 58.6KB PDF, requires Acrobat Rdr 5 | Date added | 09 Nov 2000 |
| Topics | Line Protection Devices | ||
| Downloads | 416 | ||
This paper examines the sources and consequences of these inrush currents on the distribution system, as well as on the motor protection components. Recommendations are given in regard to the selection of both overcurrent and earth leakage protection of induction motors that consider not only the motor protection requirements, but also the limitations on the protection devices that may result from the abnormal circuit disturbances that could be introduced through the starter.The increasing use of power semi-conductor equipment, including variable speed drives has introduced a new dimension into power supply networks and the application problems of equipment connected to those systems. The most visible of these problems is the introduction of harmonics into the supply network.
Did you find this white paper useful?
24 out of 50 users found this white paper useful
Related white papers
Strategic Metering
Utility missions are changing. Yesterday, they focused on delivery of reasonably priced energy and water. Tomorrow, they will encompass both supplies and the services that facilitate sustainable use. ...
Watts and Volt-Amps: Powerful Confusion
This note helps explain the differences between Watts and VA and explains how the terms are correctly and incorrectly used in specifying power protection equipment.
The Different Types of UPS Systems
There is much confusion in the marketplace about the different types of UPS systems and their characteristics. Each of these UPS types is defined, practical applications of each are discussed,...
Neutral Wire Facts and Mythology
This technical paper discusses many common misunderstandings about the function of the neutral wire and its relation to power problems. The subjects of dedicated lines, phase reversal, isolation transformers, and...
Use of 208V vs 120V for Servers
This paper explains why and when 208V is used instead of 120V for servers in North America. This same discussion applies to the use of 200V vs 100V in Japan.
What are the IEEE Requirements for Protectors?
The IEEE (Institute of Electrical and Electronics Engineers) published a document, IEEE Std. 587-1980, that described the “surge environment”,i.e., the size of the surges that equipment connected to AC wiring could...
Answers to Basic Power Protection Questions
Some of the frequently asked questions when considering surge protection and power conditioning are: “How much protection do I get from a particular model of surge protector?,” “What is the...
